NEC SL1000: Connecting NEC SL1000 to Skype (Skype Connect)

NEC SL1000 supports SIP trunk, and therefore it is possible to connect the system to Skype via Skype Connect (formerly known as Skype SIP trunk service). With the service subscribe for the business owner, now it is possible to integrate Skype call button into your corporate website. Meaning when a potential customer sees your website and wish to contact you for further enquiry on the NEC communication platforms, they can simply click on the Skype button to make a call direct to the company. 

Below shows you how typical Skype users see this Skype Connect user, and how can outside users (offnet) make a direct call to the users behind this Skype Connect service;

         

         Connecting NEC platforms to Skype

• The customer need to subscribe to Skype Connect http://www.skype.com/intl/en-us/business/skype-connect/#t_overview
• In a way this is a SIP trunk service from Skype, so on the NEC platform side you will need to quote in the necessary hardware / software licenses (VoIP card, MEM, SIP trunk licenses)
• At Skype Connect you will need to sign up for the channels (concurrent calls required), each channel US$6.95/month
• Ensure necessary network configuration are done over at the customer end (to allow SIP messages)

How Skype user see you

• Once the Skype Connect has been setup, you will have a online unique nickname assigned for this service
• So to normal Skype user, they will see you as just another contact on their buddy list

How to call to NEC platform from Skype

• In the Skype Connect setting, you will need to assign the nickname to a internal number (can be a virtual number or physical) which has been setup in your NEC platform
• So when Skype user click on your nickname, the assigned number behind the NEC platform will ring

How to call to NEC platform from Outside

• For outside users (PSTN, mobile) to call you, online number is required. This online number is an add-on service which you will need to subscribe.
• So when you have this online number, basically the Skype will translate this number to your Skype unique nickname
• Below shows you which are the countries that this service provide (local number) =>

       

• Australia
• Chile
• Denmark
• Estonia
• Finland
• France

• Germany
• Hong Kong
• Hungary
• Ireland
• Japan *
• Korea, Republic of

• Malta
• Mexico
• Netherlands
• New Zealand
• Poland
• Romania

• South Africa
• Sweden
• Switzerland
• United Kingdom
• USA

How to call to Skype from NEC platform

• It is not possible for users behind the NEC platform to seize a SIP trunk to call Skype user directly (phone cannot send alphanumeric)
• As such for users behind NEC platform to call Skype users, same thing the Skype user will need to subscribe to online number

NEC SL1000: Hotel Features & Room Status Printout

NEC SL1000 supports small boutique hotel/motel deployment less integration with PMS. Below shows you the supported hotel features;

•Check-In / Check-Out

•Wake-Up Call

•Message Waiting

•Do Not Disturb (DND)

•Single Digit Access

•Toll Restriction Class Change for each Room

•Room to Room Call Restriction

•Room Status Indication on DSS Console

•Room Status Output

•Room Monitoring by SLT

Connecting a PC to the NEC SL1000 we are able to have a room status output which shows the following information; 

Check-Out Information

•Wake-Up Call No Answer Information

•Room Status Information (MW, DND, etc)

Below is a sample room status printout;

Room Status List           --------     07/12/2012 22:37

Room Clean(Occupied) --- Check In

 201      

Room Status List           --------     07/12/2012 22:37

Room Clean(Occupied) --- Check In

Room Clean(Vacant) --- Check Out

 202     , 203     , 204     , 205     , 206      

Maid Required

Maid in Room

Inspection Required

END

Calling Class List         --------     07/12/2012 22:37

Room to Room Barring

Outside Call Class

 201     -01, 202     -02, 203     -02, 204     -02,

 205     -02, 206     -02 

END

DND and Clean Up Check     --------     07/12/2012 22:37

Do No Disturb

Clean Up Check

END

Message Service List       --------     07/12/2012 22:37

END

Wake Up Call List          --------     07/12/2012 22:37

END

NEC SL1000: Virtual Private Network (VPN) to Support Remote Users

•2 possibilities over here to setup the VPN for your NEC SL1000 to support remote users;

•Get a local VPN service with local Telcos

–Advantage

•Single running cost

•Routers provided by telco

•Service Level Agreement (SLA) guaranteed, meaning voice quality is good

–Disadvantage

•Slight higher monthly recurring cost

•Setup the VPN yourself using VPN routers

–Advantage

•Only makes use of the customer existing internet connection

•Cheaper monthly recurring cost (paying only for the internet access)

–Disadvantage

•Need to configure the VPN router yourself

•No SLA guaranteed. Meaning voice quality sometimes good, other times bad  

•VPN router will be part of your maintenance service

•

Setup NEC SL1000 Virtual Private Network (VPN) to support Remote Users (Gateway-to-Gateway, Client-Gateway) 

NEC SL1000 Hotel

NEC SL1000 is well suited for deployment in budget/boutique hotel/motel. It does comes with hotel features like check-in/check-out, room cutoff,wake-up call, single digital dialing (one-touch), message waiting, room to room calling restriction, toll restriction, room status, room status printout, dss console monitoring (for hotel operator, front desk personnel), do not disturb.

Things to take note of;

• License: NEC SL1000 Hotel license is required 
• Operator DSS console: Take note that although in total there are 60keys in the 60keys-DSS console, the last row cannot be used for room extension (where you can check the message waiting status, wake-up call status, room status)
• Integration to PMS: NO (NEC SL1000 in hotel mode works as a standalone hospitality solution for budget hoteliers where all hotel features relating to NEC SL1000 needs to be done from the phone set itself). For example when a guest checks in, the front desk personnel need to lift up the handset or speaker mode, dial a service code (738 for check-in, 739 for check-out) and then this guest is checked in. Once the guest is checked to the room, the NEC SL1000 system will record down the check-in time, change the toll restriction class and room status.  

NEC SL1000: Link up 2 x NEC SL1000 using IP

In terms of integration with NEC platforms or other vendors here are the possibilties for NEC SL1000;

• TDM - FXS/FXO, ISDN T & S Point
• IP - SIP trunk

In order to link up 2 x NEC SL1000 systems by IP connectivity, SIP trunk is the only way to achieve this setup. 

Below shows you what are the program commands required =>

As the SIP trunk setup is mirror on both SL1000 (only the IP address pointing, numbering is different) i will only give the config for 1 side.

1. Basic Setup for IP Trunk

PRG10-40-01: Set to 1

PRG10-40-02: Set it to minimum 4 (you will need your 4 x SIP trunk over here)

PRG10-03-02: Set to 1:SIP

2. Setup the SIP trunk

PRG10-12-09/10/03: Define your ip address, subnet mask, default GW

PRG84-26-01: Assign the ip address for the DSP resources (1 ip address per 16 dsp)

PRG10-17-01: Set to 2:Manual

PRG10-17-02: Define the ip address (same as your voip card ip address)

PRG10-18-01: set it to 11 (12 for the other system)

PRG10-23-01: set it to 1:yes

PRG10-23-02: point to the other system ip address

PRG10-23-04: set 12 (when user dial 12, it will point to this sip trunk)

PRG10-28-04: set it to 11 (12 for the other system)

PRG10-29-14: set to 0

PRG84-14-07/08: set it to 1800

do the same setup for the other NEC SL1000 system.

test it out by trying to make call across.

NEC SL1000 Desktop Suite Manual

Download NEC SL1000 Desktop Suite Manual
NEC SL1000 Desktop Suite Manual. This manual is details down the basic installation to setup the NEC SL1000 softphone in client mode. Inside this manual it also mention the plugin for Outlook. The Outlook Add-In allows users to make calls, End Call, Conference, Transfer, and perform screen pops through the Contacts folder within MS Outlook using the NEC Desktop application. The Outlook Add-In is installed during installation of the Desktop Application. The Desktop Application must be running for the Outlook Add-In to
function.

This application allows users to use the software in 2 user modes; softphone mode (max. 16), and RCC Deskset mode (max. 128) where the user is using the software to control the physical digital phone for media termination. SL-DT-DESKTOP SUITE-1 LIC will be required.