In terms of integration with NEC platforms or other vendors here are the possibilties for NEC SL1000;
- TDM - FXS/FXO, ISDN T & S Point
- IP - SIP trunk
In order to link up 2 x NEC SL1000 systems by IP connectivity, SIP trunk is the only way to achieve this setup.
Below shows you what are the program commands required =>
As the SIP trunk setup is mirror on both SL1000 (only the IP address pointing, numbering is different) i will only give the config for 1 side.
1. Basic Setup for IP Trunk
PRG10-40-01: Set to 1
PRG10-40-02: Set it to minimum 4 (you will need your 4 x SIP trunk over here)
PRG10-03-02: Set to 1:SIP
2. Setup the SIP trunk
PRG10-12-09/10/03: Define your ip address, subnet mask, default GW
PRG84-26-01: Assign the ip address for the DSP resources (1 ip address per 16 dsp)
PRG10-17-01: Set to 2:Manual
PRG10-17-02: Define the ip address (same as your voip card ip address)
PRG10-18-01: set it to 11 (12 for the other system)
PRG10-23-01: set it to 1:yes
PRG10-23-02: point to the other system ip address
PRG10-23-04: set 12 (when user dial 12, it will point to this sip trunk)
PRG10-28-04: set it to 11 (12 for the other system)
PRG10-29-14: set to 0
PRG84-14-07/08: set it to 1800
do the same setup for the other NEC SL1000 system.
test it out by trying to make call across.
1. Basic Setup for IP Trunk
PRG10-40-01: Set to 1
PRG10-40-02: Set it to minimum 4 (you will need your 4 x SIP trunk over here)
PRG10-03-02: Set to 1:SIP
2. Setup the SIP trunk
PRG10-12-09/10/03: Define your ip address, subnet mask, default GW
PRG84-26-01: Assign the ip address for the DSP resources (1 ip address per 16 dsp)
PRG10-17-01: Set to 2:Manual
PRG10-17-02: Define the ip address (same as your voip card ip address)
PRG10-18-01: set it to 11 (12 for the other system)
PRG10-23-01: set it to 1:yes
PRG10-23-02: point to the other system ip address
PRG10-23-04: set 12 (when user dial 12, it will point to this sip trunk)
PRG10-28-04: set it to 11 (12 for the other system)
PRG10-29-14: set to 0
PRG84-14-07/08: set it to 1800
do the same setup for the other NEC SL1000 system.
test it out by trying to make call across.
thank you very much I will see if I work
ReplyDeleteExcellent example. I have a query.
ReplyDeleteAs I can do, if one of the remote office, I have no PSTN lines, and I want to take another line of remote office.
Example: Office A 16 extensions and 4 analog PSTN lines.
in office B 16 extensions and 0 PSTN analog line.
Between the two offices I have a link and 16 MPLS IP SIP channels.
how can i link between sl1000 to sv9100 system thru vpn pls share with programing
ReplyDeletehow can i link between sl1000 to sv9100 system thru vpn pls share with programing
ReplyDeletealready to system connected and working in two office via ip first office ex.no starting 2 series and second office ex.no started in 4 series but now am newly added to emergency no in 111 for first office 333 for second office but these no cant connected i tryed froute everything but same problm thr.can u help
ReplyDeleteConnected SL1000 with Aspila EX over IP.After some hours the connection gets hanged. connectivity between 2 sites is on fibre with media convertors connected
ReplyDeleteHow many SL1000 systems can I interconnect
ReplyDelete