http://www.fileserve.com/file/Fv8EVAS/%5B5%5D_SL1000_Training_%28ISDN%29_1-0.pdf
(NEC SL1000 ISDN Setup)
This slide teaches the installer on how to setup the ISDN digital trunk for NEC SL1000. It is a comprehensive document which details down the hardware technicality (pin out, hardware used => IP4WW-2BRIDB-C1 & IP4WW-1PRU-C1), programming steps, critical setting in the NEC SL1000 system to display the CLIP - Calling Line Identification Presentation, in short CALLER-ID. how to program the ISDN trunk to accept DDI mapping number (mapping of external DDI number range into internal extension).
Important note here:
=> For ISDN-2, we are using the IP4WW-2BRIDB-C1 daughtercard mounted on either IP4WW-008E-A1 or IP4WW-000E-A1\
=> For ISDN-10 & ISDN-30, we are using the same IP4WW-1PRU-C1
For ISDN-10 setup please look at the fractional PRI setup, although now most of the time the NEC SL1000 will auto select the number of bearer (voice) channels
(NEC SL1000 ISDN Setup)
This slide teaches the installer on how to setup the ISDN digital trunk for NEC SL1000. It is a comprehensive document which details down the hardware technicality (pin out, hardware used => IP4WW-2BRIDB-C1 & IP4WW-1PRU-C1), programming steps, critical setting in the NEC SL1000 system to display the CLIP - Calling Line Identification Presentation, in short CALLER-ID. how to program the ISDN trunk to accept DDI mapping number (mapping of external DDI number range into internal extension).
Important note here:
=> For ISDN-2, we are using the IP4WW-2BRIDB-C1 daughtercard mounted on either IP4WW-008E-A1 or IP4WW-000E-A1\
=> For ISDN-10 & ISDN-30, we are using the same IP4WW-1PRU-C1
For ISDN-10 setup please look at the fractional PRI setup, although now most of the time the NEC SL1000 will auto select the number of bearer (voice) channels
No comments:
Post a Comment